B.O.D Incubator manufacturer in baddi | Ceiling/Hanging Laminar Air Flow manufacturer in baddi | Cold Room manufacturer in baddi | Horizontal LAF manufacturer in baddi | Hot Air Oven manufacturer in baddi | Mobile LAF manufacturer in baddi | Mobile LAF manufacturer in baddi | Ultra Low Deep Freezer manufacturer in baddi | CNC Shearing Machine manufacturer in baddi | CNC Press Bending Machine manufacturer in baddi | Tank Powder Coating Process manufacturer in baddi | Electrical Control Panel manufacturer in baddi | Power Control Centres (P.C.C.) manufacturer in baddi | Motor Control Centres (M.C.C.) manufacturer in baddi | Air Circuit Breaker Panels manufacturer in baddi | Relay and Metering Panels manufacturer in baddi | H.T. Panels manufacturer in baddi | Automatic power factor improvement system manufacturer in baddi | Power Distribution Panels manufacturer in baddi | Bus Ducts manufacturer in baddi | Earthing Systems manufacturer in baddi | Oil Filtration manufacturer in baddi | Pharmaceutical & Hospital SS Furniture manufacturer in baddi | Hospital Furniture manufacturer in baddi | Autoclave manufacturer in baddi | Autoclave Horizontal Cylendrical manufacturer in baddi | Autoclave Horizontal Recrangular manufacturer in baddi | Autoclave Vertical Fully Automatic manufacturer in baddi | Pharma Medical & Research Laboratory Equipment manufacturer in baddi

B.O.D Incubator

MODEL NO.- NEP-BI- 200A

NATIONAL B.O.D. INCUBATOR Construction Of Stainless Steel Sandwich Type 75 MM Thick PUF- filled Body. PUF Insulation Density: - 40kg/Meter³, Inner MOC of Chamber: - S.S.304/316, Outer MOC of Chamber- S.S. 304 & Wire Meshed type S.S. Trays are Provided (MOC:- S.S. 304/S.S. 316).Double walled PUF-filled S.S. Door is provided along with Silicon Gasket for air tight sealing. Mechanical lock & Key provision is provided for Door. Master Sensor for temperature is provided for controlling of chamber. The Control Panel, cooling system, & Air circulation blower are provided with attention of all standard parameter. Mounted on heavy castor wheels for easy movement

TECHNICAL SPECIFICATION OF B.O.D. INCUBATOR

Temperature range: Ambient +5.0°C to 60.0°C
Temperature control accuracy ±0.5°C of set point
Temperature uniformity ±0.5°C
PUF Insulation Density:- 40kg/Meter³
Control type: Time proportionate digital / Microprocessor PID, Auto tune
Temperature display: 3½ digit LED
With motorized fan blower for air circulation
Inner full length acrylic door
Input voltage: 230Volts AC, 50 Hz.
To provide Calibration/ Validation certificate
Outer cabinet mild steel powder coated & SS 304 grade dull matt finish.
Inner chamber made of stainless steel 316/ 304 grade.
Inner chamber stainless steel mirror finish.
With DQ, IQ, OQ documentation Inner Chamber Dimension External Dimension Capacity Wattage Shelves

STANDARD SIZE

W x D x H mm	Liters	Load kw	No. Of tray
450 x 450 x 450mm	91	2.000	2 to 3
610 x 610 x 610mm	227	2.000	2 to 4
600 x 650 x 900mm	351	3.000	4 to 6
600 x 650 x 1200mm	468	3.000	6 to 8
680 x 680 x 1300mm	600	3.000	8 to 10
800 x 800 x 1250mm	800	3.000	8 to 10

OPTIONAL ACCESSORIES

a) PLC based system : PLC with HMI 3.7" touch screen
b) Magnetic door lock feature.
c) GSM system: alarms sent to predefined mobile numbers.
d) Controller with printer interface to connect to EPSON Dot matrix line printer. Date, time and temperature.
e) Micro processor based PID controller in lieu of above digital temperature. Controller with Auto tune facility
f) Digital timer of 999 minutes with automatic heater cut-off for timed cycle.
g) High temperature safety cut-off with audio/visual alarm.

Temperature Mapping Incubator: Performance qualification with temperature mapping on site. Performance validation test consist of one cycle at any one-temperature point for 2 hours period. This is done to demonstrate the uniformity of temperature within the chamber is acceptable and that the items within chamber receive a uniform temperature condition. Data is collected in printed format from up to six different points within the chamber. Temperature uniformity is considered acceptable if the deviation is less ±1ºC of set temperature.

Note: Every NATIONAL B.O.D. INCUBATOR is validated prior to dispatch at the factory. Those customers who do not require on site mapping may request for FREE copy of factory mapping cycle data sheet.

Logo

Our Products