NATIONAL SAMPLING/DISPENTION BOTH
INTRODUCTION
National Enterprises one of the leading
manufacturers of Sampling /Dispensing
booth. This unit is made using premium quality
inner & outer stainless steel304, which are
sourced from the reliable vendors or the
market. Our offered Sampling /Dispensing
booth unit is provided with light weighted
statically and dynamically balanced motorblower
along with isolator, with an aim to
reduce the noise levels. This National Sampling
/Dispensing booth is available in the market at
most comparative prices.
Sampling /Dispensing booth has been
designed to provide a Class 100 working
environment at rest, with built-in scavenging
system to ensure protection for the product,
operator and surrounding environment.
Features
- Minimum vibration level.
- Complete Inner & Outer SS304/ Inner SS3404 & Outer GI powder coated.
- Two Stage iltration/ Three Stage Filtration.
- A Unique combination of the most customizes design with the highest product protection, operator comfort, versatility and reliability. Delivered with a strong table top made of stainless steel.
- Motor Blower provided are statically and dynamically balanced, Supply of sufficient capacity and static pressure is used to take care of air low requirement for entire life of HEPA. The blower is highperformance, noise abated, light weighted statically and dynamically balanced.
- SS 304 Double Walled Side Panels.
- Mechanical Differential Pressure Gauge (0mm-25mm: 2 Nos.) to monitor pressure drop across intermediate filter.
- Mechanical Differential Pressure Gauge HEPA filter (0mm-10mm: 1 No.) To monitor.
- Pressure drop across PRE Filter with respect to ambient.
- Air Velocities : 0.45 A ± 0.05 mps (90 A ± 20 FPM).
- Electrical control panel mounted on the side panel of the unit.
- LED/Tube Light.
- ON/OFF Switches for motor.
- 5/15 Amp single-phase switch socket for external equipment.
- DOP Test port at upstream of HEPA filter.
- Minimum vibration level.
- To provide DQ, IQ, OQ,& Warranty certificate Documentation.
Technical Details
Minipleat HEPA Filter with hot melt
technology, which conforms to EU 14 Grade,
with an efficiency rating better than 99.99% for
0.3μ at supply position.
Minipleat HEPA Filter with hot melt
technology, which conforms to EU 13 Grade,
with an efficiency rating better than 99.99% for
0.3μ at exhaust position pre filter which
conforms to EU 4 Grade, with efficiency of 90%
down to 10μ. These Filters are basically made
from micro- fibre -glass media and are
inherently washable.
Intermediate filter which conforms to EU7
Grade, with efficiency of 95% down to 3μ.
These Filters are basically made from micro-
fibre-glass media and are inherently washable.