Electrical Control Panel manufacturer in baddi | Power Control Centres (P.C.C.) manufacturer in baddi | Motor Control Centres (M.C.C.) manufacturer in baddi | Air Circuit Breaker Panels manufacturer in baddi | Relay and Metering Panels manufacturer in baddi | H.T. Panels manufacturer in baddi | Automatic power factor improvement system manufacturer in baddi | Power Distribution Panels manufacturer in baddi | Bus Ducts manufacturer in baddi | Earthing Systems manufacturer in baddi | Oil Filtration manufacturer in baddi | Pharmaceutical & Hospital SS Furniture manufacturer in baddi | Hospital Furniture manufacturer in baddi | Autoclave manufacturer in baddi | Autoclave Horizontal Cylendrical manufacturer in baddi | Autoclave Horizontal Recrangular manufacturer in baddi | Autoclave Vertical Fully Automatic manufacturer in baddi | Pharma Medical & Research Laboratory Equipment manufacturer in baddi | B.O.D Incubator manufacturer in baddi | Ceiling/Hanging Laminar Air Flow manufacturer in baddi | Cold Room manufacturer in baddi | Horizontal LAF manufacturer in baddi | Hot Air Oven manufacturer in baddi | Mobile LAF manufacturer in baddi | Mobile LAF manufacturer in baddi | Ultra Low Deep Freezer manufacturer in baddi | CNC Shearing Machine manufacturer in baddi | CNC Press Bending Machine manufacturer in baddi | Tank Powder Coating Process manufacturer in baddi

NATIONAL VERTICAL CYLINDRICAL AUTOCLAVE

INTRODUCTION

National vertical cylindrical Autoclave comprises of steam jacket electrically heated, inner chamber & lid made of stainless steel 316/304, works on 3-phase, 440V., A/C, 50 HZ supply fitted with automatic pressure control switch, safety valve, pressure gauge, compound gauge, temperature gauge, etc.

CHAMBER

The chamber is made of heavy gauge, stainless steel 316/304, fitted with stainless steel forged ring and forged lid, chamber & jacket are fitted with two safety valve of stainless steel, pressure gauge, water outlet and inlet ball valve and vacuum breaker Air inlet valve , stainless steel steam condenser tube with stainless steel eject valve.

Steam Generator

The steam generator is made out of stainless steel heavy gauge itted with pressure gauge and water draining valve.

Principle

The steam generates from the jacket and gets condensed by the help of the eject valve which goes through condensing tube and the dry steam gets into the chamber to penetrate into the packs contained in the chamber.

OPERATING TEMP. & PRESSURE

Sterilizing Temp : 121°C to 134°C
Sterilizing pressure : 1.2 to 2 kg/cm2 (15 psi to 22psi)
Power Requirement : Suitable to operate on 230v, 440v volts, single ph,3 ph, 50 Hz, Ac supply

AVAILABLE IN FOLLOWING CAPACITIES

Dia × Depth	Load	Capacity
300 x 500mm	3 kw	40 Ltr.
350 x 500mm	4 kw	50 Ltr.
400 × 600mm	6 kw	78 Ltr.
450 x 600mm	6 kw	98 Ltr.
550 x 700mm	6 kw	150 Ltr.

AVAILABLE IN FOLLOWING CAPACITIES

Chamber/Jacket of S.S. 316/304
Door of S.S. 304/316
Dressing Drums
Direct steam supply from centralized boiler
Digital Temperature controller /chart recorder
High pressure High vacuum model
Additional Single door/ (Double door) model.
Fully Automatic PLC & HMI with printer/micro processor base controlled model
OPTIONAL SPARE ACCESSORIES
Pressure gauge/Compound gauge
Water level glass tube
Temperature Gauge
Non return valve
Moisture trap
Jointless Gasket :– Neoprene/silicon food fade rubber, Heating elements (Flange Type) Rating 6.0 kw,9.0,kw,12.0,kw

Logo

Our Products