NATIONAL TRAY DRYER
INTRODUCTIONWe offer a range of National Tray Dryers that
are used for the best drying results in
conventional process. These Tray dryers are
provided with double walled cabinet (Single/
Double doors) and the gap between Double
walls is filled with high density fiber glass wool
insulation material to avoid heat transfer.
Stainless steel 304 trays are placed on the
movable trolleys. These dryers comes with a
dynamically balanced axial low type blower
fans that are provided for air circulation with
inlet & outlet damper with air vent filter in the
drying chamber during process and also with a
control panel board with process timer and
digital temperature controller.
We offer these tray dries in varied capacities
ranging from 6, 12, 24, 48, 96, and 192 trays,
which are manufactured using high grade raw
material such as SS 304/ SS316/ MS internal
and externals.
- All Tray & inner chamber stainless steel 304/316 construction for pharmaceutical application or external SS304/ mild steel with SS internal parts.
- Electric air heater are generate heat air and heating control through electric panel board with process timer.
- Sturdy trolleys with silicon castor wheels
- Air filter at inlet.
- Easy accessibility of impellers for cleaning.
- The exhaust duct, blower & air inlet filters can be custom built to keep out the production area with suitable ducting.
Heating Elements
Heating elements, made of high grade imported nichrome wire are insulated inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.
Temperature ControlTo provide digital temperature control display and Temperature is controlled by imported capillary type thermostat from 50°C above ambient to 180°C ±0.5°C. Temperature control knob is graduated in centigrade degrees after actually observing the temperature in steady state.
VentilationAir ventilators port are provided on sides at top for ventilate fumes & to assist convection process.
Control PanelThe equipment is provided with a Electric panel having a thermostat control knob, ON/OFF switch or digital temperature controller and indicating light.
Power RequirementSupplied with cord and plug. Suitable to operate on 230 V single phase, 50 Hz, AC supply.
Size of inner chamberW × H ×D | No. of Shelves |
455 × 605 × 455 mm | 2 to 3 |
605 × 605× 605 mm | 2 to 4 |
605 × 605× 915 mm | 5 to 8 |
605 × 910× 1220 mm | 6 to10 |
915 x 605 x 1220 mm | 6 to10 |
Optional Accessories
HMI WITH PLC CONTROLLER FULLY AUTOMATIC PROCESS WITH PRINTER FACILITY.
- Air Circulating blower.
- Digital Display Temperature controller and Indicator.
- Digital Display Temp. Controller-Cum-Indicator in lieu of thermostat.
- Micro Processor based PID temperature controller-cum-indicator in lieu of thermostat.
- Timer/ hour's meter.
Spare
Electric air heater.